CC BY
25For citation: Gong Zhengxing, Mei Shunqi, Zhangming, Zhangyanwei. Investigation of conjugate cam weft beating mechanism for weaving apparatus // Grand Altai Research & Education — Issue 2 (20)'2023 (DOI: 10.25712/ASTU.2410-485X.2023.02) — EDN: https://elibrary.ru/vxxqfc
UDK 677.05
Investigation of conjugate cam weft beating mechanism
A
for weaving apparatus
Gong Zhengxing1, Mei Shunqi1, Zhangming2, Zhangyanwei2
1 Hubei Digital Textile Equipment Key Laboratory, Wuhan Textile University, Wuhan, 430073, China; 2 Yichang Jingwei Textile Machinery Co.Ltd, 443000, China; E-mail: [email protected] ; [email protected]
Abstract: Modern weaving machines frequently use the high-speed conjugate cam weft-tying mechanism. The conjugate cam weft-beating mechanism has a greater transmission accuracy than the linkage mechanism in addition to having a compact layout and strong impact resistance when compared to the conventional four-link and six-link weft-beating mechanisms. This study primarily presents the function of the weft-beating mechanism, explains how it should satisfy the weft-beating requirements, and describes the structure and operation of the conjugate cam weft-beating mechanism. Additionally, research conjugate cam mechanism design and analysis techniques in related sectors to compile the guidelines for the next work.
Key words: conjugate cam; Principle of weft beating; law of motion
шм1, rnjm1, ш2, шш2
1 Ж 430073;
2 Ш^а 443000, ФШ;
E-mail: [email protected] ; [email protected]
mM: лшшш^тмт яшшжш&щшшшшжшшт. шшшшшмя
* This paper was supported by the Chinese Research Foundation: 51175385; 2012AAA07-02; 2014BHE010.
** (111HTE2022002, HWZ201819).
ШШШ; ШШШ
0
шшш^штш, шффм^м, тжшшт
ышх^шшшштшш. тттттчшгхжмтж шжшя, шяшод^ш'к жшш&шшш. йшттт Bt, штч^гхшш^ дамшлт^
ш, йй, эй, ШЙШК
тшх ш&ашм, чйшмттжть нт
тшшкшштттжштж^, ф
хмШЙШШШШШ&ШТШ, ттшщшшшш
шшттшшт&яшш.
1 шшшшшш*
1.1 шшшшт
(1)
(2) штшш,
(3) ,
МШ&ШШЩ [1].
1.2
я&шш.
(2) ДпШШШ*, ШМШЯ;
(3) , finife, ®№ш, mmmmm
Ж [2].
1.3
тттяшш^шш^ш^лш^штт (И№,
ff); ^ШШТШт
¿nxfimm йшфшй
m i и^тттлшш
Fig. 1. Four-link weft-beating mechanism sketch
й^ши, ш-ш&мш, тштт, шчыш, шш. 2.
2.1 ШйШШШШ
птт 1 ^йй^ад, шш^, шы
a 2
1 - 2 - 3 - mi;
4 - 5 - Mtt; 6 - ffift 7 - M; 8 - mi; 9 - §iJ№
Fig. 2. Conjugate cam wefting mechanism 1 - principal axis; 2 - master cam; 3 - rotors; 4 - Reed seat foot;
5 - rocker shaft; 6 - reed block;
7 - reed; 8 - rotors; 9 - secondary cam
2.2
^ i шп, 2 тш"? з, ш&шм 4 шм 5 ^ьшп
яштшш, шшт 6 ±тт 7 шш, 8 шттшт жмшй® 9. шшЁ, шй^^т тш? 8,
шшть, з хш^й®. щ^йшжш, шштт
3.
3.1 ШйШШШШ%
ш mm, -шит, ш
ШДШШШШ, Ш—М, ШПШ,
ШЙ&ШШ т:
1) шм^шшшшш;
2) Ш^АШШЖШ, &ШШШ йШ, ^МШФФ^тФФй^Л
3) дттшшш,
4) шш^дшш»«, ий&жлш^ш, ^нлъ
ШШШЙ^;
6) ттшй&тштйш, ^^шй&^шшй^;
ЖШШй^Шйа
[4] ИЙ^ШШ^Ш
ИМ,
тшш [5] йш^н^и^шмй^жй^^штш^ж^,
т 3 нйММ^ЙШ®
Fig. 3. trapezoidal acceleration motion curves with alternating
trigonometric functions
and straight lines
«i [6] ШХШп^Й
visual basic г^ЙШ'Ш^ШОпШ»^^
иш.
[7] тхшттжшш, ^вдатйшв^Ф, дшш
МШШД Matlab
3.2
штт [8] ттшттт'\% mm шт&т^ш шшшшттттжш*. тт&шшйттшитм
й щшшшш..
a 5 ^rn^mrn^Mmmrnm
Fig. 5. Pendulum angle error when cam sub wear error is considered
[9] ADAMS f ANSYS шяшшш^,
жшшъш.
a 6
Fig. 6. Elastic contact between cam and roller
[io] mxmm Lagrage ъшш^т'&ш^шйшщшш
Ш Matlab ШттШтшШЖ. ^^Шй^^М, ШШ
a 7 1kg
Fig. 7. Angular acceleration deviation for a reed seat foot mass of 1kg
4
[1] [D]. , 2022.
[2] ^MM. ^M^mmmRmmmMttmjmmm+Rmm^^^ft [D].
Af, 2023.
[3] [J]. ^ft^, 2018(01):41-42.
[4] fr^^fl&^I&i [J]. A^IX^f^ft, 2000(01):33-36.
[5] [D]. , 2006.
[6] [J]. t^Xf^fft, 2005(04):24-27.
[7] X^, [J/OL]. ^^ 2023(01):1-7.
[8] M^, M^®^. [J]. ^XfM, 2014(02):173-177
[9] MB. [J]. ftifi^it, 2006(02):39-40.
[10] ^ffl^, MM^. [J]. 2020, 39(04):73-81.
References
[1] Li Y. Study on the dynamics of conjugate cam weft-beating mechanism of rapier loom with gap [D]. Tianjin University of Technology, 2022.
[2] Zhu Pengcheng. Design and system dynamics analysis of conjugate cam weft beating mechanism for single layer variable height spacer fabric loom [D]. Donghua University, 2023.
[3] SUN Qingjun. Introduction of conjugate cam weft beating mechanism for rapier loom [J]. Textile report, 2018(01):41-42.
[4] ZHANG Chunlin, BAI Shihong. The design of weft-tying conjugate cam mechanism [J]. Journal of Beijing Institute of Technology, 2000(01):33-36.
[5] Li C.J. Inverse solution of weft-beating conjugate cam mechanism and its virtual prototype [D]. Donghua University, 2006.
[6] Niu Jianshe. Design of conjugate cam weft beating mechanism for shuttleless loom [J]. Journal of Zhongyuan Institute of Technology, 2005(04):24-27.
[7] Qiu Haifei Design and validation of weft beating cam for loom based on contour curve correction [J/OL]. Cotton Textile Technology. 2023(01):1-7.
[8] Tang Xuemei Motion accuracy analysis of conjugate cam wefting mechanism [J]. 2014(02):173-177.
[9] Teng Yong Elastic dynamics and finite element analysis of conjugate cam wefting mechanism [J]. Mechanical Design and Manufacturing, 2006(02):39-40.
[10] Jin Guoguang Flexible dynamic analysis of the reed of weft beating mechanism [J]. Journal of Tianjin Polytechnic University, 2020, 39(04):73-81.
