CC BY
10For citation: WANG Jinyin, Qi Di. Kinematic analysis of the weft insertion system of the multilayer fabric loom based on SolidWorks //
URL: http://rectors.altstu.rU/ru/periodical/archiv/2021/1/articles/3_10.pdf DOI: 10.25712/ASTU.2410-485X.2021.01.025
UDK 621.01
Kinematic analysis of the weft insertion system
of the multi-layer fabric loom based on SolidWorks*
WANG Jinyin1, Qi Di1
1 Hubei Digital Textile Equipment Key Laboratory, School of Mechanical Engineering and Automation,
Wuhan Textile University, Wuhan 430073, China
0 31»
[1] ffi^mmmmtift^mRR&A ^rnnwrn^
rnwm [2]
[3].
fcTBrmmmmm mmmm№mm,
SolidWorks ¿Am«^, tfrfh&it,
xx^m^M^w^ntm 1si^m^it^a
[4]. m^MM^M^
xR^wft [5]. ^Mmm^mRm&M^mrnm^mm^-n,
[6]. mS^
* This paper was supported by the Chinese Research Foundation (51541503).
Наука и образование Большого Алтая
2. 2.1
m i ^mmmmmnsimm^fàrn
Figure 1 The structure diagram of the weft insertion system of the three-dimensional cylindrical loom
m 2 m-^mm m
Figure 2. The structure diagram of the timing belt
[8]. Ä«^
1)
2) rnmmm^mw..
2.2
R=330, r=290, Ri=323, n=308, R2=335, r2=300,
Bi=12, B2=6, B3=8, {{A^
y _ S1B1Y1+S2 B2 >2 +^3 Bs Ys
c S1B1+S2B2+S3B3
^^ yc = 277mm.
Grand Altai Research & Education
тттшш yc = 277mm ^«щжю^тюм^,
МЩШ 277mm ЙЗДШ^, Щ^ШШ^М^^ ■■ Й^Ш&Ф^ШТ
штшштштт.
^ 554.0 Щ
Ш
0.00 1.83 3.67 5.50 7.33 9.17 11.00 12.83 14.67 16.50
Btli Csec)
Figure 3. Angular displacement curve of the shuttle
0 00 183 3.67 Б 50 7.33 917 1100 1283 14 67 16 50
WIS fKCI
ЩАЛшпттшш
Figure 4. Angular velocity curve of the shuttle
з
^^Ш^Ш^Ж, Д&Ш SolidWorks tffl^E^^^^,
шт.
ФЩ^Ш (References)
[1] Yang Jiancheng. Equipment and technology of carbon fiber multi-corner weaving [J]. Textile Machinery, 2014(04): 88-89.
Наука и образование Большого Алтая
[2] Liu Wei, Jiang Xiuming, Yang Jiancheng, Liu Guohui, Hou Yangqiang. The integrated design of carbon fiber multi-layer angle knitting equipment [J]. Journal of Textile Research, 2016, 37(04): 128-136.
[3] Lin Fusheng, a new type of three-dimensional loom. Hubei Province, Wuhan Textile University, 2018-03-14.
[4] Li Jiaqi. Design and dynamic analysis of conjugate cam weft insertion mechanism for heavy rapier looms [D]. Xihua University, 2020.
[5] Jin Guoguang, Zhang Yangyan, Wei Zhan, Chen Lisha, Wu Guangtao. Design and dynamic characteristics of high-speed conjugate cam weft insertion mechanism [J]. Journal of Tianjin Polytechnic University, 2017, 36(04): 73-78.
[6] Tan Wei, Lin Fusheng, Wan Hui, et al. Weft insertion mechanism of a multi-layer cylindrical loom: CN108677354A[P]. 2018.
[7] Zhang Renfeng, Zhao Xiaoqing, Bai Yu. Analysis and research on the principle scheme of weft insertion mechanism of carbon fiber multilayer loom [J]. Joint Journal of Tianjin Vocational Colleges, 2018, 20(08):107-111.
[8] Jin Guoguang, Li Wenqi, Wei Zhan, Chang Boyan. Analysis and simulation of rigid-flexible coupling dynamics of spatial four-bar weft insertion mechanism [J]. Journal of Tianjin Polytechnic University, 2018, 37(04): 72-77.
Grand Altai Research & Education
