CC BY
6For citation: Xiang Xianwu. CNC transformation of C630 general lathe // Grand Altai Research & Education — Issue 2 (20)'2023 (DOI: 10.25712/ASTU.2410-485X.2023.02) — EDN: https://elibrary.ru/ypmnfn
UDK 621.941
CNC TRANSFORMATION OF C630 GENERAL LATHE*
Xiang Xianwu1
1 Hubei Digital Textile Equipment Key Laboratory, Wuhan Textile University, Wuhan, 430073, China
E-mail: [email protected]
Abstract: In order to improve the productivity and machining accuracy of C630 general lathe, and to solve the problems of its low degree of automation and other issues need to be transformed by CNC. In this paper, on the original structure of C630 general lathe, it is transformed into automation and precision through the control based on microcontroller, and the transformed machine tool can realize the machining of end face, external circle, thread, arbitrary taper arc surface, spherical surface and so on.
Keywords: ordinary lathe; numerical control transformation; microcontroller
C630 ^m^mme^^^**
1 mxm^x^, mx 430073
E-mail: [email protected]
mC630
¡mw^mmeium. C630
ueprnnmfSxMmm^imtm, ^m^mm^mmmrn, km, mx, iiM^mmrn, «^nx.
0
C630 nmmm, »xm
* This paper was written under the guidance of Mr. Yu Feng.
** ^xmnm^mu-PM^mm^.
ш^ШФ, ГШШ, ЙЙшш&ш&Й, жй
ш, йш, шш, х^ш^ш!^, ^.гшттш.
1
C630 m Л^, ^ЙХ
ЖЙ^Ш^, Л^ДХЙ^ШЛД, Ш
ДХШЛ^ЙФЖ^ЙЛ^Й^. C630 ^ЖХЮЙХ^ДЙЖ ^ I/O X Шп Z Ш^Ж^Ш, Ш^ШШ
Ш 1
Fig. 1. Schematic diagram of the overall program
2 Ш^ШШ
шшшйШшЖ шш, тшш, тшк шшшш. m ш
z шш&т, z mmû
1 - 2 - MM^; 3 - 4 -
Fig. 2. Overall design and assembly drawing of the transit recycling unit 1 - Stepping motor; 2 - Reduction gear; 3 - Ball screw; 4 - Nut holder
^Mtt, a-^fê^^xM^, «^««mMi^, mmmmmm
Mmft&ft&ft&m, Fm ^
1135N, fw M 1.2, ^ L ^ 471.24X 106 Î&ff^Tt^^
# C ^ 10598.8N, Fm ^ 710N, fw
M 1.5, ^ L ^ 124.43 X 106 C ^ 5316.89N:
C = WWFm (1)
BËSiI^a, IMI^ËffËi^l^^ FFZD5006-5, fffà^
FFZD5006-3 tmrn^it^^. 3 mfè&fê^f
AT89C51 mmmm^mm^, sx^n^ ^rnmim po p^W^MA, ^imMrn^Mu PO p^smm,
ШТ^ S1 B, &ЭД&ШШ; ШТ^ S2 B, ШШЯМ; ШТ^ ^ S3 B, ШТ^ S4 B, &ЭД&ШЖ; ШТ^ S5 B,
ШШШйШпТ® 3.
ШзШЗДИШШ
Fig. 3. Schematic diagram of control electrical diagram
4
C630 ШШШШ^ШгТШШИ. шяжшш ШШШШЯШИ. ШХХМ C630 етХМШШШШйХйШйТ
C630 етхю^х^шл. шшшшштшхтш,
хп тшххтшштт, птшжштт&тт. ш, ш
Ш^&ШЩШМ C630 Ш^ШШтШй.
йя шшшяшп C630 шшштттш. шшш^ш эд^шшпда«, т&тАхтшшшш, ШШштШШФ тш.
[1] шт. (ШШШ) [M]. ХЖ: Ш«ХХЖМ±, 2023.
[2] «#. ШШШ^ [M]. Ш: Ш«ХХЖМ±, 2022.
[3] ьтж. [M]. Ш: Ш«ХХЖМ±, 2022.
[4] #лх. -^хша^д (ШШШ) [м]. ш: ш«ххжмх 2023.
[5] i^K, (^Hfe) [M]. AM: «XMfett, 2022.
[6] M»l. (^Hfe) [M]. «XMfett, 2022.
[7] ^M. №№№ (^fe) [M]. AM: A^SX^^^itt, 2010.
References
[1] Hu Zhanqi, Yang Li. Machine tool numerical control technology (fourth edition) [M]. Beijing: Machinery Industry Press, 2023.
[2] Zhu Xiaochun. CNC technology (third edition) [M]. Beijing: Machinery Industry Press, 2022.
[3] Zhang Wenzuo, Hu Xuehua. Microcontroller Application Technology (Third Edition) [M]. Beijing: Machinery Industry Press, 2022.
[4] Zhao D.A., Sun Y.P. Microcontroller Principles and Applications (Fourth Edition) [M]. Beijing: Machinery Industry Press, 2023.
[5] Wang, J. M., Zhu, C. Q., Wang, X.H. Controlling Electric Machines (Third Edition) [M]. Beijing: Machinery Industry Press, 2022.
[6] JIA Asia. Introduction to metal cutting machine tools (third edition) [M]. Beijing: Machinery Industry Press, 2022.
[7] Cai Houdao. CNC machine tool construction (second edition) [M]. Beijing: Beijing Institute of Technology Press, 2010.
