Научная статья на тему 'Modelling the ship safety on waterway according to navigational signs reliability'

Modelling the ship safety on waterway according to navigational signs reliability Текст научной статьи по специальности «Математика»

CC BY
80
12
i Надоели баннеры? Вы всегда можете отключить рекламу.
Область наук

Аннотация научной статьи по математике, автор научной работы — S. Guze, L. Smolarek

An approach to safety analysis connected with consecutive “m out of n” systems is presented. Further, the consecutive “m out of n: G” system is defined and the recurrent formulae for its reliability function evaluation are proposed. Next the IALA buoys and leading lights system are introduced. Moreover, the safety states model for ship navigation are defined. Further, analysis of safety during manoeuvre in restricted area with curved draws is illustrated.

i Надоели баннеры? Вы всегда можете отключить рекламу.
iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.
i Надоели баннеры? Вы всегда можете отключить рекламу.

Текст научной работы на тему «Modelling the ship safety on waterway according to navigational signs reliability»

MODELLING THE SHIP SAFETY ON WATERWAY ACCORDING TO NAVIGATIONAL SIGNS RELIABILITY

S. Guze

L. Smolarek •

Maritime University, Gdynia, Poland

e-mail: samborV/am.gdynia.pl lcs/sinolr/ain. gdynia.pl

ABSTRACT

An approach to safety analysis connected with consecutive "m out of n" systems is presented. Further, the consecutive "w out of m G" system is defined and the recurrent formulae for its reliability function evaluation are proposed. Next the IALA buoys and leading lights system are introduced. Moreover, the safety states model for ship navigation are defined. Further, analysis of safety during manoeuvre in restricted area with curved draws is illustrated.

1 INTRODUCTION

The safety of passengers and cargo involved in the process of transport is one of the most important criteria for the evaluation of the process. In the maritime transport the most important factors making up the security include: the technical efficiency of the ship, the qualifications of the people in charge of the ship and the conditions under which the transport process takes a place. There are many hazard situations in maritime transport, particularly in restricted waterways. In such situations it is useful to have methods to assess the safety of traffic. They allow the evaluation of the activities what lead to settle the hazard situation and allow the evaluation of quality control and assessment in terms of traffic safety (Pietrzykowski 2003, Purcz. 1998, Smolarek 2009). This assessment can help to develop the best control or the best manoeuvre for given hazard situation (Fuji 1977, Gucma 1998, Pietrzykowski 2003, Purcz. 1998, Smolarek 2009).

In the case of shipping on the restricted waters important aspects of safety are the technical characteristics of vessel, the type of waterway and its navigational infrastructure (Fuji 1977, IALA NAVGUIDE 2006, Kopacz et. al. 2001, Kopacz et. al. 2003).

In the case of shipping on the restricted waters the technical characteristics of vessel, the type of waterway and its navigational infrastructure are important aspects of its safety (Fuji 1977, Kopacz et. al. 2001, Kopacz et. al. 2003).

Navigational infrastructure is a set of basic navigation, stable and distributed objects and systems necessary to ensure adequate level of maritime safety (Kopacz et. al. 2003). The paper is devoted to the combining the results on reliability of the two-state consecutive "w out of m F" and consecutive "/?? out of m G" systems (Antonopoulou et. al. 1987, Barlow et. al 1975, Guze 2007a,b, Hwang 1982, Kolowrocki 2004, Malinowski 2005) into the safety analysis of the ship on restricted waterway (Kopacz et. al. 2003).

2 TWO-STATE CONSECUTIVE "M OUT OF N: F" SYSTEMS

In the case of two-state reliability analysis of consecutive "w out of //" systems we assume that (Guze 2007a, Malinowski 2005):

- n is the number of system components,

- , /' = 1,2,..., n, are components of a system,

- Tj are independent random variables representing the lifetimes of components Et., i = 1,2,..., n,

- (t) = P(Ti >t),te< 0, is a reliability function of a component E., /' = 1,2,..., n,

- Fi (t) = 1 - (t) = P(Ti <t),te< 0, °o)5 is the distribution function of the component Ej lifetime Tt, /=1,2,...,«, also called an unreliability function of a component En /=1,2,...,«.

Definition 1. A two-state system is called a two-state consecutive "w out of n: F" system if it is failed if and only if at least its m neighbouring components out of n its components arranged in a sequence of Elt E2, ..., En, are failed.

After assumption that:

- T is a random variable representing the lifetime of the consecutive "/?? out of n: F" system,

- CR(nm>(t) = P(T >t),te< 0,is the reliability function of a non-homogeneous consecutive "w out of n: F" system,

- CF„("° (i) = l- CR']"" (t) = P(T < t), t. e < 0, °o), is the distribution function of a consecutive "w out of n\ F" system lifetime T ,

we can formulate the following auxiliary theorem [5].

Lemma 1. The reliability function of the two-state consecutive "w out of n: F" system is given by the following recurrent formula

CRT\t) =

for n < m,

l-f[(l-^(0) for n =

RJi)CK"Mi)

m.

(1)

• n(l-i?,(0) for n>m,

i=n — j+l

for te< 0,°°).

Definition 2. The consecutive "w out of n: F" system is called homogeneous if its components lifetimes '/j have an identical distribution function

F(t) = P(Tl<t),i=l,2,... ,n,re<0,oo), i.e. if its components Ej have the same reliability function

R(t)= 1 -F(t), te< 0,oo).

Lemma 1 simplified form for homogeneous systems takes the following form.

Lemma 2. The reliability function of the homogeneous two-state consecutive "w out of n: F" system is given by the following recurrent formula

cRr(o =

i-(i -m)"

for n < m,

for n = m.

R(t)CR<:i(t)

+

j=i

cKUt)

for n > m.

(2)

for t e< 0, oo).

3 TWO-STATE CONSECUTIVE "M OUT OF N: G" SYSTEMS

Definition 3. A two-state system is called a two-state consecutive "w out of n: G" system if it is good if and only if at least its m neighbouring components out of n its components arranged in a sequence of Ej, E2, ..., En, are good.

In further analysis we assume, that:

- T is a random variable representing the lifetime of the consecutive "/?? out of n: G" system,

- CRG{"])(t) = P(T > t), t e< 0, oo), is the reliability function of a non-homogeneous consecutive "w out of n: G" system,

- CFGi;1"(/) = !-CRd]""(l) = P(T <l)j e<0.iis the distribution function of a consecutive "w out of n\ G" system lifetime T.

Thus, we can formulate the following auxiliary theorem (Malinowski 2005).

Lemma 3. The reliability function of the two-state consecutive "w out of n: G" system is given by the following recurrent formula

CRG" 1 (/) =

n^c)

0 - R„ (f))CRG(™\ (?)

for n < m,

for n = m,

■'^{l-R^ll-CRG^it))

j=i

1=I1-J+1

for n > m,

(3)

for t e< 0, oo).

From the above theorem, as a particular case for the homogeneous system, i.e. system composed of components with identical reliability, we immediately get the following corollary.

Corollary 4. The reliability function of the homogeneous two-state consecutive "w out of m G" system is given by the following recurrent formula

CRGlf(t) =

for n < m,

for n = m,

№)Y

(1 -R(t))CRG<:>(t)

+ (\-R(t))JjR'(t)

,/=i

•(l-CRG^(o) forn>«7,

(4)

for t e< 0, oo).

4 THE MAIN KIND OF NAVIGATION INFRASTRUCTURE IN WATERWAYS DESIGN

The classification of navigation infrastructure is as follows (Kopacz et. al. 2001, 2003): signalling - warning and visual positioning infrastructure; radio-navigation positioning infrastructure; - vessel traffic monitoring, information and navigation support infrastructure.

Every kind of the infrastructure has components in the form of an object or a system of navigation infrastructure.

An object is a simple element, for example a buoy or lighting tower. The objects create system of navigation infrastructure.

For safe navigation in restricted or limited areas IALA introduced the system of buoys and leading lights. It can be helpful to define a clearing line for the limits of safe navigation (IALA NAVIGUIDE 2006).

There are major parameters which are important for the optimum number and arrangement of buoys and leading lights. These parameters depend on the average channel width, the channel length, whether the section is straight or curved.

In the other hand the optimum separation distance between buoys and the numbers of buoys and leading lights are important. The distance is depended on the average width of the section concerned and its curvature. It is obvious that in the sections of waterway which have the greatest risk of groundings or collisions, the numbers of buoys and leading lights should be highest (IALA NAVIGUIDE 2006).

5 SAFETY ANALYSIS OF SHIP ON WATERWAY

Definition 4. The system is in safety state if the ship operator has full navigational information.

Definition 5. The system is in dangerous state if the ship operator has insufficient navigational information.

Under above definitions we define the set of safety states as

S = i^D } >

where:

Ss - state of safety, SD - state of dangerous.

Thus, after assumption that:

ns - limit number for safety state; nD - limit number for dangerous state.

and considering formulae (l)-(4), we can define probabilities of states as follows:

-P(Ss)= CRGi:*>(t)Jorte<0,-). -P(SD)= l-CRi:°>(t), for f e < 0,°o).

It means that

iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.

- probability that the system is in safety state is equal to probability that at least ns neighbouring components are good;

- probability that the system is in dangerous state is equal to probability that at least nD neighbouring components are failed.

6 APPLICATION

Let us consider the vessel waterway given in Fig 1.

i Track Keeping,,.^

■M s H04

Figure 1. The vessel manoeuvring phases (IALA NAVIGUIDE 2006).

In particular case we have on the track 12 components of buoys system. We assume that for phase of track keeping ship operator need at least two navigational signs fo safety manoeuvring and in the phases of turn recovery the same operator need at least three signs. Thus, the number limits for safety states are give as

ns =3, nD =2.

Because the probabilities of buoys' visibility are the same, the probabilités of respective states are given as

P(Ss) = CRG[l\t), where

- for n < 3

CRG[ 3>(t) = CRG23'(t) = 0, for f e < 0, °o).

(5)

- for n = 3

- for n> 3

And for

- for n < 2

- for n = 2

CRG(t) = [R(t)f, for t e < 0,»). (6)

- R{t)CRG™ (t) - R2 (t)CRGI"'? (t)

+ R(t) + i?2 (0j for f e < 0, oo). (7)

P(SD) = 1 - CR[^' (t), where

CR<2>(t) = 0, for?e<0,°o). (8)

CR<22>(t) = l-2R(t) + R2(t), for?e<0,oo). (9)

- for n> 3

a?:2' (f) = 1 - RidCR^ (t) + (1 - R(t))CR<„2> (t)\ (10)

for t e< 0, oo).

In particular case when the lifetimes of buoys have exponential distribution function of the form

F(t) = 1 - e~omt, forie<0,oo), i.e. if the reliability function of the particular buoys are given by

R(t) = e-°mt, for fe< 0,oo). Considering (5)-(10), we get the following reccurent formula for the probabilities of safety states a) safety state Ss

- for n < 3

CRG{3>(t) = CRG(,3>(t) = 0, for re< 0,oo). (11)

- for n = 3

CRG<33>(t) = e^03t, for f e< 0,°°). (12)

-for n > 3

CRGl3,(t) = (l-e™uiCRG%(t)

- e~omtCRG{"_2 (t) - e~omt CRG{"_3 (t)

+ e^01'+e^m'lforre<0Joo). (13)

b) in the dangerous state Sd

- for n < 2

CR[2\t) = 0, forfe<0,oo). (14)

- for n = 2

CR(22>(t) =1 - 2e~omt +e~omt, forre<0,oo). (15)

-for n > 3

CRi:-\t) = 1 - - [CR<„:> (t) + (l - - )CR% (t) I (16)

for re< 0,oo).

Then the values of the particular probabilities of the safety states, calculated by the computer program based on the formulae (11)-(16), are presented in the Tables 1-2 and illustrated in Figure 2.

Table 1. The values of probabilities of the dangerous state of navigational signs

t P(S„) = 1-CR:;>U)

0.0 0.0000

5.0 0.0248

10.0 0.0885

15.0 0.1762

20.0 0.2753

25.0 0.3766

30.0 0.4737

35.0 0.5626

40.0 0.6415

45.0 0.7095

50.0 0.7671

55.0 0.8149

60.0 0.8541

65.0 0.8857

70.0 0.9111

75.0 0.9312

80.0 0.9470

85.0 0.9594

90.0 0.9690

95.0 0.9764

100.0 0.9821

105.0 0.9865

110.0 0.9898

115.0 0.9923

120.0 0.9942

125.0 0.9957

130.0 0.9968

135.0 0.9976

140.0 0.9982

145.0 0.9987

150.0 0.9990

155.0 0.9993

160.0 0.9995

Table 2. The values of probabilities of the safety state of navigational signs

t P(Ss) = CRG<J>{t)

0.0 0.0000

50.0 0.3990

100.0 0.4637

150.0 0.4871

200.0 0.4833

250.0 0.4156

300.0 0.3151

350.0 0.2194

400.0 0.1447

450.0 0.0924

500.0 0.0578

550.0 0.0357

600.0 0.0219

650.0 0.0134

700.0 0.0082

iНе можете найти то, что вам нужно? Попробуйте сервис подбора литературы.

750.0 0.0050

800.0 0.0030

850.0 0.0018

900.0 0.0011

950.0 0.0007

1000.0 0.0004

Figure 2. The graphs of particular states probabilities

7 CONCLUSIONS

The paper is devoted to an approach to safety analysis of ship in restricted waterways because of navigational infrastructure. The recurrent formulae for two-state reliability functions, a general one for non-homogeneous and its simplified form for homogeneous two-state consecutive "m out of k: G" systems have been proposed. The formulae for a homogeneous two-state consecutive "m out of k: F" and a homogeneous two-state consecutive "m out of k: G" has been applied to evaluation of ship safety in limited waterway.

Further, the safety model was used to the safety of ship on exemplary limited area with 12 navigational signs. The probabilities of respective states was evaluated and illustrated. The transition probabilities between states depend of navigational signs technical reliability and waterway shape.

The calculated examples show us the possibilities of practical model usage.

REFERENCES

Antonopoulou J. M., Papstavridis S., 1987. Fast recursive algorithm to evaluate the reliability of a circular consecutive-k-out-of-n: F system. IEEE Transactions on Reliability, Tom R-36, Nr 1, 83 - 84. Barlow R. E., Proschan F., 1975. Statistical Theory of Reliability and Life Testing. Probability Models. Holt Rinehart and Winston, Inc., New York.

Fuji Y., 1977. The behaviour of ships in limited waters. Proc. Of the 24th International PIANC Congress, Leningrad.

Gucma L., 1998. Kryterium bezpieczenstwa manewru na torze wodnym. Materiafy na Konferencj% Explo-Ship, WSM, Szczecin.

Guze S., 2007. Numerical approach to reliability evaluation of two-state consecutive „k out of n: F" systems. Proc.lst Summer Safety and Reliability Seminars, SSARS 2007, Sopot, 167-172.

Guze S., 2007. Numerical approach to reliability evaluation of non-homogeneous two-state consecutive „k out of n: F" systems. Proc. Risk, Quality and Reliability, RQR 2007, Ostrava, 69-74.

Hwang F. K., 1982. Fast Solutions for Consecutive-k-out-of-n: F System. IEEE Transactions on Reliability, Vol. R-31, No. 5, pp 447-448.

IALA NAVGUIDE. 2006. Aids for Navigations. IALA-AISM, France. Kolowrocki K., 2004. Reliability of Large Systems, Elsevier.

Kopacz Z., Morgas W., Urbanski J., 2001. The maritime Safety system. Its components and elements. The

Journal of Navigation, No 2.

Kopacz Z., Morgas W., Urbanski J., 2003. Navigational infrastructure. Its state. Its establishing and its changes. Annual of Navigation, No 6.

Malinowski J., 2005, Algorithms for reliability evaluation of different type network systems, WIT, Warsaw.

Pietrzykowski Z., 2003. Procedury decyzyjne w sterowaniu statkiem morskim. Zeszyty Naukowe WSM Szczecin, Nr 72, Szczecin.

Purcz, 1998. Ship collision aspect unique to inland waterways. Ship Collision Analysis.Gluver H. And Olsen D. (edts.), Balkema, Rotterdam.

Smolarek L., 2009. Finite Discrete Markov Model of Ship Safety. TransNav2009.Symposium Proceedings, Gdynia.

i Надоели баннеры? Вы всегда можете отключить рекламу.