CC BY
12
DOI: 10.14529/ctcr180114
METHOD OF SELECTING TECHNOLOGIES OF A MANUFACTURING ENTERPRISE TO CARRY OUT PROJECTS ON THEIR IMPROVEMENT ON THE BASIS OF THE THEORY OF FUZZY SETS
A.V. Gollay, [email protected],
O.V. Loginovskiy, [email protected]
South Ural State University, Chelyabinsk, Russian Federation
Carrying out projects on improving technological processes is one of the crucial tasks of manufacturing enterprise management. Nowadays increasing the number of successful projects of this sort and as a result solving a problem of choosing an object to carry out similar researches on from the total number of technological processes of an enterprise is a pressing issue.
A method of selecting technologies to implement projects on their improvement based on mathematical tools of fuzzy sets, which uses the data on the performance of a technology in the past as well as the data on the potential for development of such technology in the future is described in this article. The above ensures the increase in efficiency of selection compared with the ways based only on historical information. In the method offered, classical selection criteria exposed to fuzzifi-cation are used. Then all the operations are performed on fuzzy sets. The output is a ranked list of technologies of the enterprise with a high degree of probability of implementation of the project on its improvement. An apparent advantage of the proposed method is using mathematical tools of the theory of fuzzy sets allowing implementing a process of selecting technologies in intuitively clear terms that simplifies the implementation of the method into managerial practices of a manufacturing enterprise.
Keywords: industrial technology, technological development, technological processes, managerial decisions, fuzzy set, membership function, evaluation.
Introduction
One of the crucial tasks of carrying out a policy of technical and technological improvement at a manufacturing enterprise is searching for advanced technologies, necessary to focus the engineers' attention on, to improve them.
Most often this problem is solved by means of analysing the previous operational background of the enterprise. We investigate one of the criterion Ki :
- maintenance costs,
- duration of processes,
- downtime,
- share in the prime cost of end products, etc.
Next, ranging by the chosen criteria is carried out and the data is visualized by means of a Pareto chart (Fig. 1).
In case of choosing several criteria to select a technology to be improved it is possible to use the integrated indicator:
n
к=a • к,
(i)
3 4 Technologies
Fig. 1. Ranging technologies by means of a Pareto chart
i=1
where Pi is a weighting factor of partial criterion Ki and N is a number of technologies being investigated.
Applicability
After defining a concern within the technology used, the project [3] on its improvement is initiated. Such projects can often fail in the end as researchers fail to receive a solution giving significant improvements. Therefore the task to increase the efficiency of the choice made to build a portfolio of projects of the enterprise in the area of technological improvements and increasing a share of successful projects is relevant.
Development of technologies curve
It is known that any technical system including technological processes follows the law of development in a logistic curve [10]. At the moment of its occurrence (Fig. 2, phase I), the technology possesses low characteristics. Further, when it begins to gain greater popularity, a large number of researchers contribute to its essential development (Fig. 2, phase II). When approaching the limits of physics principles on which the technology is based, the potential for possible improvements becomes extremely limited (Fig. 2, phase III). In the saturation phase, even large investments in improving this technology don't lead to a dramatic growth of its characteristics. Failures of projects of technological development at manufacturing enterprises which are guided only by past performance of the enterprise may account for this phenomenon.
Thus, the knowledge on regularity of development of technologies has to be used when building a portfolio of projects on improvement.
Fig. 2. Logistic (S-shaped) curve of development of technologies: I - onset phase, II - rapid growth phase, III - a maturity phase
Let's consider a set of technologies which are available at the enterprise (fi), (Fig. 3). As a result of selection based on historical record, it is possible to reveal a subset of "problem" technologies A (A cn) on set fi. As stated above, subset A contains technologies having both essential and not essential potential for development (Fig. 3, a). For carrying out an analysis of available technologies from the point of view of the potential for improvement, we shall select subset B (B c Q) as a set of technologies having a high potential for improvement. Interception (ARB) will represent a set of technologies having both an essential value for the enterprise and a high potential for improvement (Fig. 3, b). The efficiency of the projects aimed at improving technologies from subset (ARB) will be higher.
a) b)
Fig. 3. Venn diagrams for the array of technologies of the enterprise: a) selection on the basis of historical data, b) selection on the basis of historical data and accounting the curve of development
Method of selecting technologies for their subsequent improvement on the basis of the theory of fuzzy sets
The task of selecting under investigation contains a considerable uncertainty owing to a set of factors influencing the performance of the enterprise. It is appropriate to express the information using fuzzy sets. The founder of the mathematical theory of fuzzy sets is L.A. Zadeh [15]. A significant contribution to its development was made by A.N. Borisov [1, 2], S.A. Orlovsky [9], H. Raif [12],
A. Coffman [5, 6], etc. Among the modern writers there are A. Piegat [11], S. Gotvald [4], A. Nedose-kin [8], V. Siler [14], A. Shatalov [13], D. Mukhamediyeva [7].
The most expedient algorithm to select the technologies for implementing projects on their improvement is as follows (Fig. 4).
Fig. 4. Flowchart of selecting technologies for implementing projects on their improvement
Box 1 (Input). A set of technologies of the enterprise. Each manufacturing enterprise can be presented as a set of technologies whose identification and formalization is an important part of a managerial process. On the output of the process of selecting technologies, the whole set of technologies to select is given.
Box 2. Fuzzification on criterion (K). The importance of each technology being investigated can be estimated by the aggregated criterion K (1). Then it is necessary to carry out the procedure of fuzzification (interpreting it in the terms of fuzzy sets). For this purpose we shall define fuzzy set A by means of membership function : A ^ [0,1]. Membership function |j,A takes on values from 0 to 1 and
shows a membership degree of element a e A to fuzzy set A . Usual set A is called a basic set.
Let basic set A be a set of technologies of the enterprise which need to be improved:
A = {«technologyj», «technology2»,..., «technologyN»}.
Then the fuzzy set of the technologies which need to be improved will be set as follows:
A = ^(«technologyx», ^), («technology2», ^),..., («technologyN», ^^ )j,
(2)
where is a function of membership of /-technology to fuzzy set A, a1 is technology 1,
(3)
is tech-
nology 2, etc.
If we choose such test of ranking (K ) that the greater its value, the more the enterprise needs improvement of this technology, to describe the membership function we can choose the ^-shaped function which is described by the following equations:
0, a <8j,
s(a, Si, Ô2, S3) = <
2
^ a-O2
VS3-Si J
1 -21 a-S3
Л -Si j
S1 < a < S2,
S2 < a < S3,
(4)
a > S,
where S2 =
S1 +S3 2
Generalizing the opinion of experts answering the following question: "At what value of criterion ( K ) does the technology needs to be improved first of all?", it is possible to calculate the values and to construct the membership function (Fig. 5).
a
2
2
1
Мл f
Criterion (K)
Fig. 5 The membership function showing the membership of technology to the set of "technologies which need to be improved" depending on the design criterion
Thus, at the output of this block there will be fuzzy set A in which membership function pa. will
be prescribed for each technology of the enterprise (3).
Box 3. Filtration. Let's address to Fig. 2 where it was shown that development of technologies occurs along an S-shaped curve. Phase II i.e. development (rapid growth) is of the greatest interest for implementing projects on improvement. Developing technologies in phase I is too risky and is inclined to high probability of failure. Development of technologies in phase III doesn't seem promising as the limits of physical laws are reached. In phase III it is necessary to conduct researches in order to replace a technology with a radically new one.
Let's address to the experts with a question whether the technologies belong to a phase of rapid development (in terms of the theory of fuzzy sets).
Let's introduce fuzzy set B as a set of technologies being in the stage of rapid development:
B = j(«technologyl», ), («technology2 », |Mb2),..., («technologyN », ) j, (5)
where is a function of membership of /-technology to fuzzy set B .
Next, to realize the filtration let's introduce an operation on the fuzzy sets of the following form: M ab = M a (a) "mb (b)
pAB2 =m a (a) -mb (b),
(6)
mabn = M a (a) -M b(b).
In essence this operation represents using a filter once, twice and n times. The multiplicity of filter (n) depends on how important the researcher considers a factor of development of technology along an ^-shaped curve of development. At n = 0,
mabo = Ma (a) - mb (b) = Ma (a) -1 = Ma (a), (7)
i.e. the filter isn't applied and ranking is made only taking criterion K into account.
Box 4. Ranking. Let's carry out ranking (ordering) of technologies according to decreasing membership function. The greater value, the more important (more "problem") the technology for the enterprise and more promising (from the point of view of realization of potential for development) the technology is.
Box 5. Filtration on a threshold value. It is possible to introduce threshold value n . The technologies having a membership function less than this value will be considered unpromising for implementation of projects on their improvement (Fig. 6).
Fig. 6. Realization of ranking and filtration on threshold value of membership function u
AB
Box 6 (Output). A set of technologies to be improved. Following the end of a selection process, at the output we shall have a ranked list of technologies of the enterprise which can be used to build a portfolio of projects on improving the operational activity.
Adaptation of the method
While implementing the projects the adaptation of the offered method can be required. Here are the following parameters which can be changed in it:
- criterion K (partial criteria Ki) - box 1,
- a function of membership of i-technology to a fuzzy set of technologies which need to be improved ma (Fig. 5) - box 3,
- multiplicity of filter n - box 3,
- threshold value of membership function p n (threshold) - box 5.
Conclusions
The offered method of selecting technologies of the industrial enterprise allows increasing a share of successfully implemented projects on improvement of operation activities due to the selection using both the data on past periods of the performance of the enterprise and the knowledge of the stage of development of the technology. A definite advantage of the offered method is using mathematical tools of the theory of fuzzy sets allowing the process of selection of technologies in intuitively clear terms that simplifies implementing the method in the managerial practice of a manufacturing enterprise.
References
1. Borisov A.N., Krumberg O.A., Fedorov I.P. Prinyatie resheniy na osnove nechetkikh modeley [Decision-Making on the Basis of Fuzzy Models]. Riga, Znanie Publ., 1990. 184 p.
2. Borisov A.N., Alekseyev A.V., Merkuryeva G.V., Slez N.N., Glushkov V.I. Obrabotka nechetkoy informatsii v sistemakh prinyatiya resheniy [Processing of Fuzzy Information in Decision-Making Systems]. Moscow, Radio i Svyaz Publ., 1989. 304 p.
3. Gelrud J.D., Loginovskiy O.V. Upravlenie proektami: metody, modeli, sistemy. Monografiya [Project Management: Methods, Models, Systems]. Chelyabinsk, South Ural St. Univ. Publ., 2015. 330 p.
4. Gottwald S. Universes of Fuzzy Sets and Axiomatizations of Fuzzy Set Theory. Part I: Model-Based and Axiomatic Approaches. Studia Logica, 2006, 82 (2), pp. 211-244. DOI: 10.1007/s11225-006-7197-8
5. Kofman A., Khil A.Kh. Vvedenie v teoriyu nechetkikh mnozhestv v upravlenii predpriyatiem [Introduction to Fuzzy Sets Theory in Enterprise Nanagement]. Minsk, Vysshaya Shkola Publ., 1992, 224 p.
6. Kofman A. Vvedenie v teoriyu nechetkikh mnozhestv [Introduction to Fuzzy Sets Theory]. Moscow, Radio i Svyaz Publ., 1982. 432 p.
7. Mukhamediyeva D. Razrabotka nechetkikh modeley zadach prinyatiya resheniy [Developing of Fuzzy Models of Decision-making Tasks]. Palmarium Academic Publ., 2014. 196 p.
8. Nedosekin A. Fuzzy Financial Management. Moscow, Alfa library, 2003. 68 p.
9. Orlovsky S.A. Problemy prinyatiya resheniy pri nechetkoy iskhodnoy informatsii [Decisionmaking Problems with Fuzzy Input Information]. Moscow, Nauka Publ., 1981. 208 p.
10. Petrov V.P. Zakon uvelicheniya stepeni ideal'nosti [Law of Increasing the Degree of Perfection]. Tel Aviv, 2002. Available at: http://www.trizland.ru/trizba/pdf-books/zrts-08-ideal.pdf.
11. Piegat A. Nechetkoe modelirovanie i upravlenie [Fuzzy Modelling and Management]. Moscow, BINOM, Laboratoria Znaniy Publ., 2017. 798 p.
12. Raif H. Analiz resheniy. Vvedenie v problemu vybora v usloviyakh ne-opredelennosti [Analysis of Decisions. Introduction to Selection Problem under Uncertainty]. Moscow, Nauka Publ., 1989, 408 p.
13. Shatalov A. Teoriya nechetkikh mnozhestv v otsenke effektivnosti proektov [Fuzzy Sets Theory in Evaluating of Project Efficiency]. LAP Lambert Academic Publ., 2012. 96p.
14. Siler W., Buckley J. Fuzzy Expert Systems and Fuzzy Reasoning. Birmingham, Wiley Interscience, 2005. 422 p.
15. Zadeh L.A. Fuzzy Sets as a Basis for a Theory of Possibility Systems: Tutorial. Holland, Publ. house North-Holland, 1978. 34 p.
Received 20 December 2017
УДК 005.7 DOI: 10.14529/ctcr180114
МЕТОДИКА ОТБОРА ТЕХНОЛОГИЙ ПРОМЫШЛЕННОГО
ПРЕДПРИЯТИЯ ДЛЯ РЕАЛИЗАЦИИ ПРОЕКТОВ
ПО ИХ УЛУЧШЕНИЮ НА БАЗЕ ТЕОРИИ НЕЧЕТКИХ МНОЖЕСТВ
А.В. Голлай, О.В. Логиновский
Южно-Уральский государственный университет, г. Челябинск, Россия
Реализация проектов по улучшению технологических процессов явля-ется одной из ключевых задач управления промышленным предприятием. На сегодняшний день актуальным является вопрос повышения доли успешных проектов подобного рода и, как следствие, решение задачи вы-бора объекта проведения подобных исследований из общего числа технологически процессов предприятия.
В статье описана методика отбора технологий для реализации проектов по их улучшению, построенная на базе математического аппарата нечетких множеств и использующая данные о работе технологии в прошлом, а также данные о потенциале развития этой технологии в будущем, за счет чего обеспечивается повышение эффективности отбора, по сравнению со способами, основанными только на исторической информации. В предложенной методике используются классические критерии отбора, которые подвергаются фазификации. После чего, все операции проводятся над нечеткими множествами. На выходе получается ранжированный список технологий предприятия, с высокой степенью вероятности осуществления проекта по ее улучшению. Несомненным преимуществом предлагаемой методики является использование математического аппарата теории нечетких множеств, позволяющего вести процесс отбора технологий в интуитивно понятных терминах, что упрощает внедрение методики в практику управления промышленным предприятием.
Ключевые слова: индустриальные технологии, технологическое развитие, технологические процессы, принятие решений, нечеткие множества, функция принадлежности.
Литература
1. Борисов, А.Н. Принятие решений на основе нечетких моделей / А.Н. Борисов, О.А. Крум-берг, И.П. Федоров. - Рига: Знание, 1990. - 184 с.
2. Обработка нечеткой информации в системах принятия решений / А.Н. Борисов, А.В. Алексеев, Г.В. Меркурьева и др. - М.: Радио и связь, 1989. - 304 с.
3. Гельруд, Я.Д. Управление проектами: методы: модели, системы: моногр. / Я.Д. Гельруд, О.В. Логиновский; под ред. д-ра техн. наук, проф. А.Л. Шестакова. - Челябинск: Издат. центр ЮУрГУ, 2015. - 330 с.
4. Gottwald, S. Universes of Fuzzy Sets and Axiomatizations of Fuzzy Set Theory. Part I: ModelBased and Axiomatic Approaches / S. Gottwald // Studia Logica. - 2006. - 82 (2). - С. 211-244. DOI: 10.1007/s11225-006- 7197-8
5. Кофман, А. Введение в теорию нечетких множеств в управлении предприятием / А. Коф-ман, А.Х. Хил. - Минск: Высшая школа, 1992. - 224 с.
6. Кофман, А. Введение в теорию нечетких множеств / А. Кофман. - М: Радио и связь, 1982. -432 с.
7. Мухамедиева, Д. Разработка нечетких моделей задач принятия решений. - Palmarium Academic Publishing, 2014. - 196 с.
8. Nedosekin, A. Fuzzy Financial Management / A. Nedosekin A. - M. : Alfa library, 2003. - 68 p.
9. Орловский, С.А. Проблемы принятия решений при нечеткой исходной информации / С.А. Орловский. - М. : Наука, 1981. - 208 с.
10. Петров, В.П. Закон увеличения степени идеальности / В.П. Петров. - Тель-Авив, 2002. -http://www. trizland. ru/trizba/pdf-books/zrts-08-ideal.pdf.
11. Пегат, А. Нечеткое моделирование и управление / А. Пегат. - М. : БИНОМ, Лаборатория знаний, 2017. - 798 с.
12. Райф, Х. Анализ решений. Введение в проблему выбора в условиях неопределенности / Х. Райф. - М. : Наука, 1989. - 408 с.
13. Шаталов, А. Теория нечетких множеств в оценке эффективности проектов / А. Шаталов. - LAP Lambert Academic Publishing, 2012. - 96 с.
14. Siler, W. Fuzzy Expert Systems and Fuzzy Reasoning / W. Siler, J. Buckley - Birmingham: Wiley Interscience, 2005. - 422 с.
15. Zadeh, L.A. Fuzzy Sets as a Basis for a Theory of Possibility Systems: tutorial / L.A. Zadeh. -Holland: Publishing House North-Holland, 1978. - 34 p.
Голлай Александр Владимирович, канд. хим. наук, доцент кафедры экономики и управления на предприятиях строительства и землеустройства Высшей школы экономики и управления, Южно-Уральский государственный университет, г. Челябинск; [email protected].
Логиновский Олег Витальевич, д-р техн. наук, профессор, заведующий кафедрой информационно-аналитического обеспечения управления в социальных и экономических системах Высшей школы электроники и компьютерных наук, Южно-Уральский государственный университет, г. Челябинск; [email protected].
Поступила в редакцию 20 декабря 2017 г.
ОБРАЗЕЦ ЦИТИРОВАНИЯ
Gollay, A.V. Method of Selecting Technologies of a Manufacturing Enterprise to Carry out Projects on Their Improvement on the Basis of the Theory of Fuzzy Sets / A.V. Gollay, O.V. Loginovskiy // Вестник ЮУрГУ. Серия «Компьютерные технологии, управление, радиоэлектроника». - 2018. - Т. 18, № 1. - С. 117-123. DOI: 10.14529/ctcr180114
FOR CITATION
Gollay A.V., Loginovskiy O.V. Method of Selecting Technologies of a Manufacturing Enterprise to Carry out Projects on Their Improvement on the Basis of the Theory of Fuzzy Sets. Bulletin of the South Ural State University. Ser. Computer Technologies, Automatic Control, Radio Electronics, 2018, vol. 18, no. 1, pp. 117-123. DOI: 10.14529/ctcr180114
