CC BY
30
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
ЕКСПЛУАТАЦ1Я ТА РЕМОНТ ЗАСОБ1В ТРАНСПОРТУ
UDC 629.4.016.5:625.144
M. I. KAPITSA1, D. V. BOBYR2, A. Y. DESIAK3*
'Dep. «Locomotives», Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, St. Lazaryan, 2, Dnipro, Ukraine, 49010, tel. +38 (0562) 33 19 61, e-mail m.i.kapitca@ua.fm, ORCID 0000-0002-3800-2920 2Dep. «Locomotives», Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Str. Lazaryan, 2, Dnipro, Ukraine, 49010, tel. +38 (0562) 33 19 61, e-mail dmitrob@ua.fm, ORCID 0000-0003-1441-3861 3*Dep. «Locomotives», Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Str. Lazaryan, 2, Dnipro, Ukraine, 49010, tel. +38 (0562) 33 19 61, e-mail andrey.desyak1992@gmail.com, ORCID 0000-0001-8650-5242
DETERMINING PERMISSIBLE SPEED OF TILTING TRAIN IN CURVED TRACK
Purpose. The main purpose of the article is to determine the permissible speed of the air-cushioned tilting train in curved track and to justify the expediency of operating this type of rolling stock on the railways of Ukraine to increase the speed, improve the passenger comfort and save the energy due to more uniform high-speed train driving. Methodology. The determination of the maximum permissible speed of the tilted train in curved track involves the use of methods of linear and vector algebra and empirical formulas for applied scientific and technical research. The calculation of the maximum speed is based on the principle of calculating centrifugal force for the velocities that meet the safety criteria of movement on the horizontal unbalanced acceleration in the stable radius curve. Findings. The results of the calculations showed that in the 1000 m radius curved track section, provided the passenger comfort, the maximum permissible speed of the train without forced tilt is 132 km/h, and with the forced tilt - 189 km/h. The velocity gain in the curve is about 30% and up to 10% on the section (depending on the number of curves). Originality. The method of determining the permissible speed of the tilted train in curved track is improved, which consists in determining the permissible centrifugal force acting on the train in the stable radius curve, taking into account the passenger comfort conditions. Practical value. This method allows accurately determining the permissible speed on the condition of passenger comfort in the curved section and the required additional tilt angle of the train, depending on the speed, curve radius and canting. Enhanced speed and comfort of passenger trains in the future will increase the demand for rail services among the population and strengthen the position of rail transport in Ukraine's transport system.
Keywords: high-speed transport; rolling stock; body tilt system; centrifugal force; resultant force; curve radius; canting
Introduction
Integration of Ukraine into the European community creates preconditions for a significant increase in passenger and freight transportation volumes. Under these conditions, the requirements for transport are essentially new. The radical measure to provide domestic and international passenger transportation is the creation of a high-speed railway network with access to the European network and CIS countries [7].
In order to solve the problem of introduction of high-speed trains in Ukraine, it is necessary to apply the systematic approach that includes the analysis of world experience, the study of the preconditions for organization of high-speed trains in Ukraine, ways of connecting the domestic railway network with the European one, designing of highspeed lines, which involves the development of requirements and standards for plan and longitudinal profile designing [5].
Another problem of the development of highspeed transport is that virtually all infrastructure
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
and rolling stock remained as inheritance since the Soviet era. Therefore, the entire railway industry of Ukraine is out-dated and needs a global upgrade, consisting of:
- reconstruction of the track and the contact network;
- modernization or renewal of the fleet of rolling stock;
- complete replacement of signalling, centralization and locking devices with more modern ones designed for high-speed traffic;
- replacement of the cargo and passenger train operation model.
If Ukraine aspires to integrate into the transport system of Europe, then the rail transport must meet the European standards in terms of comfort, reliability and security.
Such leading countries as Germany, France, Italy, Spain, China and Japan are actively using trains on air-cushioned suspension with body forced tilt in curves to improve the speed and comfort of passengers. This can significantly reduce the effect of centrifugal acceleration on passengers in curved track sections and rolling stock vibration at high speeds [13].
Problem statement
On the railway lines, the possibility of speed increasing in the track curved sections is limited by the effect of transverse centrifugal acceleration, acting on the rolling stock and passengers. It increases in proportion to the velocity squared and decreases in proportion to the curve radius. Also, centrifugal acceleration creates the force that pushes the rolling stock to the outer rail, which can lead to the derailment. Passengers and locomotive crew also experience the effect of centrifugal force, which tries to throw them away from the centre of the curve to the car side. This factor creates considerable discomfort during the trip. Partially, the action of the centrifugal force is reduced by increasing the canting in the track curved sections. In this case, some part of the centrifugal force acting on the passengers is compensated.
If one installs the rail lines in the curve in one level, then the centrifugal force, together with the crew weight, will form the resultant force that can go to the outer rail line. This force causes:
- increased wear of the lateral surface of the outer rail;
- rebounds of the external rail;
- unpleasant sensations of passengers due to unbalanced acceleration.
Maximum canting in Ukraine is 150 mm By the permission of Ukrzaliznytsya, the maximum canting can amount to more than 150 mm, but this will lead to uneven wear of rails and discomfort of passengers at low speed [9].
However, the canting is not always enough to increase the speed in the curve. This is due to the fact that the canting is designed for the speed of freight trains, which, as a rule, move at speeds up to 80 km/h.
This problem is especially relevant for Ukraine, since for the introduction of high-speed traffic, the minimum radii of curves should be about 4 0005 000 m, and on the railway lines of Ukraine there are curves with radii of about 500 m, which does not meet the requirements of high-speed railway lines. The increase of the curve radius is a complicated process, expensive and, to some extent, impossible, due to the densely populated settlements and rail infrastructure. Thus, the tilting rolling stock should solve the problem of the implementation of high-speed traffic on the territory of Ukraine. When using trains with such a system, the part of the centrifugal force is compensated.
Therefore, in this article, we strive to prove the expediency of operation of the high-speed rolling stock on the Ukrainian railway lines with the body tilt system in the curved track sections in order to increase the speed of passage of curves without profile reconstruction and change. It will also allow saving the energy through the steadier mode of train driving.
Analysis of researches and publications
In the works by Redchenko E. S. [10], Kurgan M. B. [6] and Zubko A. P. [1] the possibility of using the tilting rolling stock in Ukraine during the organization of high-speed traffic was already considered.
In order to determine the permissible speed of the train with the body forced tilt in the curve the work [10] proposes the following method.
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
The vehicle moving in the curve is affected, in general, by two main forces: gravity and centrifugal force, which depends on the movement speed and the curve radius. All forces acting on the vehicle in the track curve are shown in Fig. 1
The centrifugal force is determined by the formula:
Fe =
m ■V2 R
(1)
where m - rolling stock mass, kN; V - rolling stock
speed in radius, m.
the
curve,
km/h; R -
curve
а = arcsin
2S
(2)
where 2S - track width, m.
Due to this, a part of the centrifugal force is compensated by the force of gravity, since in the floor plane of the car the projections of the foregoing forces are directed to the opposite sides.
Obviously, the result of the vectorial addition of these forces will be some unbalanced lateral
force Fu = FC1
■Fg
To provide the greatest comfort for passengers,
the unbalanced lateral force should be equal to zero. The projection of the centrifugal force must be fully compensated by the gravity component:
mV2 R
-cosа = mg sin а
(3)
where g - free fall acceleration, m/s2.
The profile of the curves is constructed with a fixed optimal canting. But since trains move at different speeds, one should define «insufficient canting». The maximum canting is limited for reasons of preventing the rolling stock tipping into the curve when it stops or moves slowly and is equal
to hmax=0,15 m.
Insufficient canting can be compensated by inclining the vehicle body with the help of additional force for the angle p, into such a position that the body would occupy during movement in the curve with the required canting of the outer
rail i.e. h = hu + hmax .
The condition for compensating the centrifugal force for tilting trains can be written as follows:
mV2
cos^ + ß) = mg sin^ + ß).
(4)
Consequently, the expression for the additional angle of the body tilt will be as follows:
Fig. 1. Vehicle movement with additional tilt of the body in curve
To reduce the effect of centrifugal force in the curves, the outer rail is placed higher than the internal one by the value of cant h, m. Therefore, the track is inclined with respect to the horizon at the following angle:
ß = arctg
( V 2 ^
R ■ g
-а.
(5)
The disadvantage of this method is that the author [10] does not take into account the condition of passenger comfort on horizontal unbalanced acceleration, and the additional angle of the body tilt is determined with full compensation of the centrifugal force, i.e. the unbalanced acceleration in this case is equal to zero, and as it is known, the permissible unbalanced acceleration is au = 0.7 m/s2.
The authors in [6] and [1] propose the method for determining the permissible speed of the tilting train in the curve, which is as follows.
In circular curves, the permissible speed of movement is determined by the safety criterion of movement on the horizontal unbalanced acceleration:
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
V = 3.6 R\ аг
S
(6)
where he - estimated canting, mm; S - distance between the rail top axes, 1 600 mm.
In modern vehicles, which during curve passing have the body forced tilt into the middle of the curve at the angle y, the permissible speed increases with the introduction of canting into the formula (6), which is an additional compensation for the unbalanced acceleration:
Ah =
%-S - sin у 180 .
(7)
Substituting formula (7) into formula (6), we obtain the permissible speed of the train with the forced tilt of the body in the curve:
V = 3.6 R\ ar
■f <h-
■Ah)
(8)
The main disadvantage of this method is that the authors [1, 8] do not perform calculations to determine the additional angle of the train tilt y during the curve passage, since the additional tilt angle depends on the curve radius, movement speed, canting and the maximum tilt angle achieved by the rolling stock.
Purpose
Justification of the expediency of operation of the air-cushioned rolling stock with tilt in curved sections on the railways of Ukraine for increased speed and comfort of passengers.
Methodology
The methodology for determining the maximum permissible speed of the tilted train in curved track involves the use of methods of linear and vector algebra and empirical formulas for applied scientific and technical research.
The calculation of the maximum speed of the tilted train in curved track is based on the principle of calculating centrifugal force for the velocities that meet the safety criteria of movement on the horizontal unbalanced acceleration in the stable radius curve.
Basic material
The modern high-speed trains have three main systems of body tilt in curves: passive, active and active-passive.
In passive tilt systems, the body is suspended like a pendulum with a centre of rotation above the body gravity centre. When moving in the curve, the centre of gravity under the action of centrifugal force is displaced externally, providing the required angle of the body tilt. The tilt angle of the passive system can be up to 3°-5°. In this case, a significant part of the centrifugal force is compensated, and the speed in the curves can be increased by 14% [8].
In active systems, the tilt of the body is performed with the help of special devices. Hydraulic, pneumatic, electro-hydraulic and electromechanical systems are used as a power-driven mechanism of the body forced tilt. In order to ensure correct operation of the system, the rolling stock is equipped with a number of sensors, which, depending on the speed, curve radius and canting, determine the optimal angle of the rolling stock tilt. Typically, the tilt angle of the active systems is 8°-10° [8], which makes it possible to increase the speed to 25-30 %.
The active-passive tilt system can work both as active and passive depending on the speed and the desired angle of the body tilt. If you need to turn the body to 3°-5° angle, then the system works as a passive one. If you need to set a larger angle, then the system starts to work as active. The advantage of the passive tilt system is that there is no need to spend energy for the body tilt and it has simple and reliable design. And the advantage of the active one is the greater maximum possible tilt angle [5, 14].
In this paper, the method for determining the permissible speed of movement in the curve with the body forced tilt is as follows:
- determination of the permissible speed of the train in the curve provided the passengers feel comfortable;
- determination of the forces acting on the train in the track curved section (centrifugal force and gravity);
- determination of the permissible centrifugal force in the curve subject to comfort;
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
- determination of the resultant force for centrifugal and gravitational forces;
- determination of the angle of deflection of the resultant force vector at the permissible speeds from the vertical axis Oy;
- determination of the angle of deflection of the resultant force vector from the vertical axis of the locomotive, which in turn is the desired angle of the body tilt in the curve;
- determination of the permissible angle of deflection of the resultant force vector from the vertical axis Oy with the body forced tilt;
- determination of the value of the resultant force and centrifugal force with the body forced tilt in the curve;
- definition of maximum speed with the maximum angle of the body tilt, which is provided by the rolling stock design;
- construction of the graph showing the dependence of the centrifugal force of the locomotive on the speed in the track curve, the limitation of the centrifugal force without body tilt, the limitation of the centrifugal force with body tilt and the limitation of the speed at the maximum angle of the body tilt.
Increasing the speed of movement requires much greater compliance with traffic safety criteria. This is especially true for the tilting rolling stock. In world practice, the following traffic safety criteria are used:
- vertical acceleration, which arises during the movement of the train in the curve section of the longitudinal track profile;
- longitudinal acceleration associated with the processes of braking and run-up;
- horizontal unbalanced acceleration, which arises during the movement in the track curve in plan;
- full acceleration, acting on the passenger;
- vertical acceleration occurring in the passenger car body, caused by fluctuations, and acting on a passenger;
- criterion of safety of movement on elastic edging of a rail.
The criterion that influences the safety of the passengers of the tilting train the most is the crite-
rion of comfort, that is, the criterion of safety of movement on the horizontal unbalanced acceleration.
As already noted, the permissible speed of movement in the track curve in the condition of comfort of passengers and locomotive crew is determined by the largest value of unbalanced acceleration au = 0.7 m/s2, which is specified on the railways of the CIS countries. In justified cases, in order to eliminate the speed limit on individual curves depending on the locomotive type, the transverse permissible unbalanced acceleration can be increased to 1 m/s2, but not long-term and not repeated. Permissible unbalanced acceleration for freight trains, provided that the outer or inner rail of the curve is not overloaded, is equal to ± 0.3 m/s2 [3, 12].
Different authors offer different formulas for determining the permissible speed of movement in the curved track. From the considerable volume of literature, it is possible to define three most used empirical formulas for determining the permissible speed of passage of curves provided the comfort of passengers and locomotive crew. Formula (9) is given in [3], formula (10) in [11], and formula (11) in [2].
Vperm =V R • (0.08 • h +12,96-au) (9) Vperm 3.62 • R ^h• g +au ] (10)
V^ = 3.6^R • (au + 0,00613 • h) (11)
According to the above formulas in Fig. 2 we constructed the graph of dependence of the permissible movement speed on the curve radius without body tilt for the following conditions: the canting h = 50, h = 100 and h = 150 mm, the curve radius R = 500...5 000 m. Since the difference in the results obtained by formulas (9), (10) and (11) is less than one per cent, so it makes no sense to construct all three dependencies; it's enough to just construct the dependence by one of the formulas for three different cants.
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
Fig. 2. Graph of the dependence of permissible movement speed on the curve radius: 1, 2, 3 - functions Vperm (R) with canting
by h = 50, h = 100 and h = 150 mm, respectively
The vehicle moving in a curve, in general, is affected by two main forces: gravity and centrifugal force, which depends on the speed and radius of the curve. All forces acting on the locomotive in the curve are shown in Fig. 3. The result of the vector addition of centrifugal and gravitational forces is the resultant force.
For the calculation scheme of the forces acting, the centrifugal force FC, acting on the rolling stock in the curve is determined by the formula (1), and the angle of canting a is determined by the formula (2).
Substituting in formula (1) the value of the maximum permissible speed under the condition of comfort, which is calculated by the formula (9), we obtain the maximum permissible centrifugal force acting on the rolling stock in the curved track.
The fig. 4 shows the graph of dependence of the centrifugal force on the curve radius at _ different speeds. R
Fig. 3. Vehicle movement without body tilt in the curve:
Fg - gravity force; FC - centrifugal force; - resultant force of gravity and centrifugal forces;
a - angle between the vector of the gravity force and the vertical axis of the rolling stock without body tilt and the angle of canting; P -additional angle of rolling stock tilt; y - angle between the resultant force vector and the gravity force vector
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального унiверситету залiзничного транспорту, 2017, № 4 (70)
Fig. 4. Graph of dependence of the centrifugal force on the curve radius at different speeds:
1, 2, 3, 4 - functions FC (R) at speeds of 50, 100, 150 and 200 km/h respectively; 5 - limitation of centrifugal force
The resultant force from the centrifugal and gravitational forces is determined by the vector addition and will be equal to:
Fr =V Fc 2 + Fg 2.
(12)
The force of gravity acting on the rolling stock is determined by:
fg = mg.
(13)
The basis of the method for determining the permissible speed of the tilting rolling stock is the definition of the maximum deflection angle of the resultant vector without and with body tilt, provided that the passengers feel comfortable. The deflection angle of the resultant vector without body tilt is equal to:
у = arctg
' F >
V Fg J
(14)
For the greatest comfort of the passengers, the resultant vector should be perpendicular to the floor plane. Besides, this angle is an additional necessary angle for the body tilt in the curve and is determined by the formula:
ß = arctg
( Fr >
V Fg J
-a .
(15)
у = arctg
( V 2 >
R ' g
ß = arctg
( V 2 ^
R'g
-a .
(16)
(17)
It is seen that the formula for determining the additional angle of body tilt (17) coincided with the formula (5), which is calculated according to the method [1].
If we calculate the additional tilt angle by the formula (15), it is worth noting that the additional tilt angle can be not only positive, but also negative. The negative tilt angle is formed when the body is tilted in the direction opposite to the turn. This is necessary in the case when the train moves at a low speed in the curve with a sufficiently high canting.
The permissible tilt angle of the resultant vector to the vertical axis Oy with the body forced tilt is defined as the sum of the deflection angles of the resultant vector without body tilt and the required additional tilt angle:
Ут =y+ß.
(18)
Now, the permissible resultant and centrifugal forces with the body forced tilt will equal respectively:
F =-
1 R.T
Fg
cos yT
FC T = V Frt
- Fg
(19)
(20)
After the substitution and transformation of formulas (14) and (15) we obtain:
In order to determine the maximum permissible speed of the tilting train under the condition of maximum compensation of centrifugal force and subject to the horizontal unbalanced acceleration, it is necessary to solve the equation (17) in relation to the unknown velocity V, taking the tilt angle p = 8°, since this tilt angle is the maximum permissible for this type of rolling stock.
The maximum speed of the tilting locomotive, provided that the resultant force is perpendicular to the car floor, is determined as:
V =
max1
Vtg(a + ßT>12.96'R' g . (21)
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
The maximum speed of the tilting locomotive, provided that the resultant force has the maximum allowable tilt angle with the condition of comfort, will be determined by the formula:
^max2 =V tg (y + Pr )• 12.96 • R • g . (22) Findings
The Figure 5 shows the constructed graph for determining the permissible speed of tilting train movement in the curve. The graph shows the centrifugal force acting on the rolling stock when speed increases and a number of limitations: curve 1 is the permissible centrifugal force without body tilt, curve 2 is the permissible centrifugal force with body tilt, curve 3 is the function FC (V) of centrifugal force from the speed acting on the train in the curve, curve 4 is the maximum speed limitation provided that the resultant vector is perpendicular to the body floor, curve 5 is the maximum
speed limitation with body tilt under the condition of passenger comfort. The graph is constructed for the following input data: train speed V = 0...250 km/h, curve radius R = 1000 m, canting h = 100 mm, maximum angle of rolling stock tilt P = 8°. For comparison, Table 1 shows the results of calculations of the permissible speed of tilting train in the track curve according to the authors' methods [1, 6, 10] and the calculation method presented in this article.
As the graph shows, the maximum permissible speed of the train without body tilt is 132 km/h, and with body tilt - 189 km/h. The velocity gain in the curve R = 1000 m is 30 %. This result can be considered adequate, as it coincides with the results of calculations [1, 6].
Similar dependences can be constructed for other values of curves radii and canting.
kN
500
WO
300
200
100
i I I I I ! —J- -
4 \ 1 1 1 1 1 ! 1 1 1 1
^ !/ / i /1 I / i 5 /
/ J_ 3 / ^ A 1 ■ i i
[ i - + —I -I i i i ! 1
i i i i i i i i
О
50
100
150
200
Fig. 5. Graph for determining the permissible speed of tilting train movement in the curve
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
Table 1
Results of calculations of the permissible train speed according to different methods
Method of calculating the permissible train speed in the curve Speed of the train without body tilt, km/h Speed of the train provided that the centrifugal force is fully compensated by body tilt, km / h Speed of the train with body tilt under comfortable conditions, km / h
Methodology described in the article 130.7 161.4 188.7
Methodology of the authors [1, 6] 130.6 - 186.3
Methodology of the author [5] - 161.4 -
Originality and practical value
The method for determining the permissible speed of movement and the additional angle of body tilt in the track curve of the tilting train is improved. It takes into account the comfort condition by the value of the horizontal unbalanced acceleration. This will allow more accurately
determining the speed of movement of this
type of rolling stock in the curved track section.
Conclusions
1. As demonstrated by the calculations made, the determining factors for the railways of Ukraine affecting the train speed are the curve radii and canting, which is designed for the movement of freight trains.
2. The results of calculations indicate that the maximum permissible speed of the train without body tilt in the curve R = 1000 m is 132 km/h,
and with body tilt - 189 km/h. The velocity gain is 57 km/h.
3. Having analyzed all the factors affecting the movement speed and the obtained calculation results, it can be concluded that this type of rolling stock is expedient to be used on the railways of Ukraine. This is due to the fact that in Ukraine there are many curves of small radius that are inappropriate and to some extent impossible to increase.
4. Besides, due to more uniform maintenance of high-speed train driving, it is possible to achieve energy saving [4].
5. Putting into operation of the tilting rolling stock on the Ukrainian railways will allow getting the velocity gain of up to 30 % in the curve and up to 10 % in the section (depending on the number of curves). Increased speed of trains will considerably strengthen the position of railways in the transport system of Ukraine.
LIST OF REFERENCE LINKS
1. Аналiз можливосп застосування в Укрш'ш рухомого складу з примусовим нахилом кузова вагошв при оргашзацп швидшсного руху / А. П. Зубко, I. П. Корженевич, М. Б. Курган, Д. М. Курган // Вюн. Днш-ропетр. нац. ун-ту залiзн. трансп. iм. акад. В. Лазаряна. - Дшпропетровськ, 2004. - Вип. 4. - С. 156-164.
2. Б^й, В. I. Залiзнична колiя : навч. поаб. / В. I. Бший. - Донецьк, 2007. - 160 с.
3. Боднар, Б. £. Теоргя та конструкцгя локомотивiв. Екшажна частина : тдруч. / Б. £. Боднар, £. Г. Нечаев, Д. В. Бобир. - Дншропетровськ : Лiра ЛТД, 2009. - 284 с.
4. Визначення енергозаощаджуючих режимiв розгону по1здв / Б. £. Боднар, М. I. Капща, А. М. Афана-сов, Д. М. Кислий // Наука та прогрес транспорту. - 2015. - № 5 (59). - С. 40-52. doi: 10.15802/stp2015/55359.
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
5. £р1цян, Б. Х. Моделювання комбшовано! системи нахилу кузову швидк1сного рухомого складу зал1з-ничного транспорту / Б. Х. £рщян, Б. Г. Любарський, Д. I. Якунш // Вост.-Европ. журн. передовых технологий. - 2016. - № 2 (9). - С. 4-17. doi: 10.15587/1729-4061.2016.66782.
6. Курган, М. Б. Оргашзац1я швидшсного руху при застосуванш рухомого складу з примусовим нахилом кузова вагошв / М. Б. Курган, I. П. Корженевич, В. В. Арсонов // В1сн. Дншропетр. нац. ун-ту зал1зн. трансп. 1м. акад. В. Лазаряна. - Дншропетровськ, 2006. - Вип. 11. - С. 50-59.
7. Курган, Н. Б. Предпосылки создания высокоскоростных магистралей в Украине / Н. Б. Курган // Укра!-нськ зал1знищ. - 2015. - № 5/6 (23/24). - С. 16-21.
8. Ковалев, В. И. Скоростной и высокоскоростной железнодорожный транспорт / В. И. Ковалев. - Санкт-Петербург : Искусство России, 2001. - Т. 2. - 350 с.
9. Правила визначення тдвищення зовшшньо! рейки i встановлення допустимих швидкостей в кривих д1лянках коли. - Дшпропетровськ : Арт-Прес, 1999. - 44 с.
10. Редченко, Е. С. Определение величины и распределение центробежной силы для проведений испытаний поездов с наклоняемыми кузовами на катковом стенде / Е. С. Редченко // Локомотив-информ. -2008. - № 5. - С. 12-17.
11. Сокол, Э. Н. Сходы с рельсов и столкновения подвижного состава (Судебная экспертиза. Элементы теории и практики) : монография / Э. Н. Сокол. - 2-е изд., перераб. и доп. - Киев : Транспорт Украины, 2004. - 368 с.
12. On Influence of Design Parameters Of Mining Rail Transport On Safety Indicators [Electronic resource] / K. Ziborov, V. Protsiv, S. Fedoriachenko, I. Verner // Mechanics, Materials Science & Engineering J. - 2016. - Vol. 2 (1). - P. 63-70. - Available at: http://mmse.xyz/en/on-influence-of-design-parameters-of-mining-rail-transport-on-safety-indicators/. - Title from thr screen. - Accessed : 19.06.2017.
13. Qi, Z. A three-dimensional coupled dynamics model of the air spring of a high-speed electric multiple unit train / Z. Qi, F. Li, D. Yu // Proc. of the Institution of Mechanical Engineers. Part F : J. of Rail and Rapid Transit. - 2017. - Vol. 231. - Iss. 1. - P. 3-18. doi: 10.1177/0954409715620534.
14. Zhou, R. Robust system state estimation for active suspension control in high-speed tilting trains / R. Zhou, A. Zolotas, R. Goodall // Vehicle System Dynamics. - 2014. - Vol. 52. - Iss. sup1. - P. 355-369. doi: 10.1080/00423114.2014.901540.
М. I. КАП1ЦА1, Д. В. БОБИРЬ2, А. е. ДЕСЯК3*
'Каф. «Локомотиви», Дшпропетровський нацюнальний ушверситет зарничного транспорту 1меш академжа В. Лазаряна, вул. Лазаряна, 2, Днтро, Укра!на, 49010, тел. +38 (0562) 33 19 61, ел. пошта m.i.kapitca@ua.fm, (ЖСГО 0000-0002-3800-2920
2Каф. «Локомотиви», Дшпропетровський нацюнальний ушверситет затзничного транспорту iменi академжа В. Лазаряна, вул. Лазаряна, 2, Днтро, Украша, 49010, тел. +38 (0562) 33 19 61, ел. пошта dmitrob@ua.fm, (ЖСГО 0000-0003-1441-3861
3*Каф. «Локомотиви», Дшпропетровський нацюнальний уншерситет залiзничного транспорту iменi академжа В. Лазаряна, вул. Лазаряна, 2, Днтро, Украша, 49010, тел. +38 (0562) 33 19 61, ел. пошта andrey.desyak1992@gmail.com, ОЯСГО 0000-0001-8650-5242
ВИЗНАЧЕННЯ ДОПУСТИМО? ШВИДКОСТ1 РУХУ ПО1ЗДА З ПРИМУСОВИМ НАХИЛОМ КУЗОВА В КРИВИХ Д1ЛЯНКАХ КОЛ11
Мета. Головною метою статп е визначення допустимо! швидкосп руху по!зда на пневматичному пвдвь шуванш з примусовим нахилом кузова в кривш дшянщ коли та обгрунтування доцшьносл експлуатацп да-ного типу рухомого складу на залiзницях Украши. Це необхщно для збшьшення швидкосп руху, пвдвищен-ня комфорту пасажирiв та економи енергоресурав за рахунок бтш рiвномiрного швидшсного режиму ведения по!зда. Методика. Визначення максимально! допустимо! швидкосп руху по!зда в кривш з примусовим нахилом кузова передбачае застосування методiв лшшно!, векторно! алгебри та емтричних формул для прикладних науково-техшчних дослвджень. В основi розрахунку максимально! швидкосп руху закладений принцип розрахунку ввдцентрово! сили для швидкостей руху, яш вiдповiдають критерiям безпеки руху по горизонтальному незагашеному прискоренню в кривш сталого радiуса. Результати. Отримаиi розрахунки
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
показали, що в кривiй дiлянцi коли радiусом 1 000 м, за умови комфортабельносп пасажирiв, максимальна допустима швидшсть руху по!зда без примусового нахилу кузова складае 132 км/год, а з примусовим нахи-лом кузова - 189 км/год. Прирют швидкосп в кривiй дорiвнюе близько 30 %, та до 10 % - на дмнщ (в за-лежносп вiд кiлькостi кривих). Наукова новизна. Авторами удосконалено метод визначення допустимо! швидкостi по!зда з примусовим нахилом кузова в кривш. Вш полягае у визначеннi допустимо! вщцентрово! сили, яка дiе на по!зд у кривiй сталого радуса з урахування умов комфортабельностi пасаж^в. Практична значимкть. Даний метод дозволяе досить точно визначити допустиму швидшсть руху (за умови комфортабельносп пасаж^в) у кривiй дiлянцi та необхщний додатковий кут нахилу по!зда в залежностi ввд швидкостi, радуса криво! та шдвищення зовшшньо! рейки. Збшьшення швидкостi руху та комфорту пасажирських по!здiв у майбутньому призведе до збiльшення попиту на послуги залiзничного транспорту серед населения та змщнення позицiй залiзничного транспорту в транспортам системi Укра!ни.
Ключовi слова: високошвидкюний транспорт; рухомий склад; система нахилу кузова; вщцентрова сила; рiвнодiюча сила; радiус криво!; пвдвищення зовшшньо! рейки
М. И. КАПИЦА1, Д. В. БОБЫРЬ2, А. Е. ДЕСЯК3*
'Каф. «Локомотивы», Днепропетровский национальный университет железнодорожного транспорта имени академика В. Лазаряна, ул. Лазаряна, 2, Днипро, Украина, 49010, тел. +38 (0562) 33 19 61, эл. почта m.i.kapitca@ua.fm, (ЖСГО 0000-0002-3800-2920
2Каф. «Локомотивы», Днепропетровский национальный университет железнодорожного транспорта имени академика В. Лазаряна, ул. Лазаряна, 2, Днипро, Украина, 49010, тел. +38 (0562) 33 19 61, эл. почта dmitrob@ua.fm, (ЖСГО 0000-0003-1441-3861
3*Каф. «Локомотивы», Днепропетровский национальный университет железнодорожного транспорта имени академика В. Лазаряна, ул. Лазаряна, 2, Днипро, Украина, 49010, тел. +38 (0562) 33 19 61, эл. почта andrey.desyak1992@gmail.com, ОЯСГО 0000-0001-8650-5242
ОПРЕДЕЛЕНИЕ ДОПУСТИМОЙ СКОРОСТИ ДВИЖЕНИЯ ПОЕЗДА С ПРИНУДИТЕЛЬНЫМ НАКЛОНОМ КУЗОВА В КРИВЫХ УЧАСТКАХ ПУТИ
Цель. Главной целью статьи является определение допустимой скорости движения поезда на пневматической подвеске с принудительным наклоном кузова в кривом участке пути и обоснование целесообразности эксплуатации данного типа подвижного состава на железных дорогах Украины для увеличения скорости движения, повышения комфорта пассажиров и экономии энергоресурсов за счет более равномерного скоростного режима ведения поезда. Методика. Определение максимальной допустимой скорости движения поезда в кривой с принудительным наклоном кузова предусматривает применение методов линейной, векторной алгебры и эмпирических формул для прикладных научно-технических исследований. В основе расчета максимальной скорости движения заложен принцип расчета центробежной силы для скоростей движения, которые соответствуют критериям безопасности движения по горизонтальному непотушенному ускорению в кривой постоянного радиуса. Результаты. Полученные расчеты показали, что в кривом участке пути радиусом 1 000 м, при условии комфортабельности пассажиров, максимальная допустимая скорость движения поезда без принудительного наклона кузова составляет 132 км/ч, а с принудительным наклоном кузова -189 км/ч. Прирост скорости в кривой составляет около 30 %, и до 10 % - на участке (в зависимости от количества кривых). Научная новизна. Усовершенствован метод определения допустимой скорости поезда с принудительным наклоном кузова в кривой, который заключается в определении допустимой центробежной силы, действующей на поезд в кривой постоянного радиуса с учетом условий комфортабельности пассажиров. Практическая значимость. Данный метод позволяет достаточно точно определить допустимую скорость движения (по условию комфортабельности пассажиров) в кривой и необходимый дополнительный угол наклона поезда в зависимости от скорости, радиуса кривой и возвышения наружного рельса. Увеличение скорости движения и комфорта пассажирских поездов в будущем приведет к увеличению спроса на услуги железнодорожного транспорта среди населения и укрепит позиции железнодорожного транспорта в транспортной системе Украины.
Ключевые слова: высокоскоростной транспорт; подвижной состав; система наклона кузова; центробежная сила; равнодействующая сила; радиус кривой; возвышения наружного рельса
Наука та прогрес транспорту. Вкник Дншропетровського нацюнального ушверситету залiзничного транспорту, 2017, № 4 (70)
REFERENCES
1. Zubko, A. P., Korzhenevych, I. P., Kurhan, M. B., & Kurhan, D. M. (2004). The analysis of possibility of application in ukraine of the rolling stock with tilting body cars when organizing high-speed traffic. Bulletin of Dnipropetrovsk National University of Railway Transport, 4, 156-164.
2. Bilyi, V. I. (2007). Zaliznychna koliia [Tutorial]. Donetsk: Donetsk Railway Transport Institute.
3. Bodnar, B. Y., Nechaiev, Y. H., & Bobyr, D. V. (2009). Teoriia ta konstruktsiia lokomotyviv. Ekipazhna chastyna [Manual]. Dnipropetrovsk: PP «Lira LTD».
4. Bodnar, B. Y., Kapitsa, M. I., Afanasov, A. M., & Kyslyi, D. N. (2015). Definition of energy saving acceleration modes of trains. Science and Transport Progress, 5 (59), 40-52. doi: 10.15802/stp2015/55359
5. Yeritsyan, B., Liubarskyi, B., & Iakunin, D. (2016). Simulation of combined body tilt system of high-speed railway rolling stock. Eastern-European Journal of Enterprise Technologies, 2 (9) (80), 4-17. doi:10.15587/1729-4061.2016.66782
6. Kurhan, M. B., Korzhenevych, I. P., & Arsonov, V. V. (2006). Organization of high-speed traffic with the use of rolling stock with a forced tilt body cars. Bulletin of Dnipropetrovsk National University of Railway Transport, 11, 50-59.
7. Kurhan, M. B. (2015). Predposylki sozdaniya vysokoskorostnykh magistraley v Ukraine. Ukrainian Railways, 5-6 (23-24), 16-21.
8. Kovalev, V. I. (2001). Skorostnoy i visokoskorostnoy zheleznodorizhnyy transport (Vol. 2). Saint Petersburg.
9. Ukrzaliznytsia. (1999). Pravyla vyznachennia pidvyshchennia zovnishnoi reiky i vstanovlennia dopustymykh shvydkostei v kryvykh diliankakh kolii. Dnipropetrovsk: Art-Pres.
10. Redchenko, Y. S. (2008). Opredeleniye velichiny i raspredeleniye tsentrobezhnoy sily dlya provedeniy ispy-taniy poyezdov s naklonyaemymi kuzovami na katkovom stende. Lokomotyv-Inform, 5, 12-17.
11. Sokol, E. N. (2004). Skhodi s relsov i stolknoveniya podvizhnogo sostava (Sudebnaya ekspertiza. Elementy teorii i praktiki) [Monograph] (2nd ed.). Kyiv: Transport Ukrainy.
12. Ziborov, K., Protsiv, V., Fedoriachenko, S., & Verner, I. (2016). On Influence of Design Parameters of Mining Rail Transport on Safety Indicators. Mechanics, Materials Science & Engineering, 2 (1), 63-70. Retrieved from http://mmse.xyz/en/on-influence-of-design-parameters-of-mining-rail-transport-on-safety-indicators/
13. Qi, Z., Li, F., & Yu., D. (2017). A three-dimensional coupled dynamics model of the air spring of a high-speed electric multiple unit train. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (1), 3-18.
14. Zhou, R., Zolotas, A., & Goodall, R. (2014). Robust system state estimation for active suspension control in high-speed tilting trains. Vehicle System Dynamics, 52 (1), 355-369. doi:10.1080/00423114.2014.901540
Prof. V. L. Gorobets, D. Sc. (Tech.), (Ukraine); Prof. A. V. Sokhatskyi, D. Sc. (Tech.), (Ukraine) recommended this article to be published
Received: March 31, 2017
Accessed: July 05, 2017
