10ANALYSIS OF PROCESSES OF ADSORPTION OF ORGANVERMICULITE
TO BENZENE AND WATER VAPOR
Mukaddas Tuychievna Alieva Gulnora Akmalovna Ikhtiyarova Noroy Ruzmatovna Kholturayeva
Tashkent State Technical University a.muqaddas5854@gmail.com
ABSTRACT
In this article, the modification of chitosan synthesized from the died honey bee Apis Millifera with the mineral vermiculite and the physicochemical properties of the obtained sorbent using the Mac-Ben device, its meso- and microporosity, as well as the degree of crystallinity according to the results of X-ray diffraction analysis, are studied.
Keywords: wastewater, chitin, chitosan, vermiculite, organvermiculite, sorbent, Mac-Ben device, X-ray diffraction analysis, sorption isotherm.
ORGANVERMIKULITNING BENZOL VA SUV BUG'IGA ADSORBSIYASI
JARAYONLARINI TAHLIL QILISH
ANNOTATSIYA
Ushbu maqolada jonsiz asalari Apis Milliferadan sintez qilib olingan xitozanni vermikulit minerali bilan modifikatsiyalash va olingan sorbentni fizik-kimyoviy xossalarini Mak-Ben qurilmasi yordamida mezo- va mikrog'ovakligini hamda rentgen nurlari difraksion tahlili natijalari asosida kristallik darajasi o'rganidi.
Tayanch so'zlar: oqava suv, xitin, xitizan, vermikulit, organovermikulit, sorbent, Mak-Ben qurilmasi, rentgen nurlari difraksion tahlili, sorbsiya izotermasi.
INTRODUCTION
Due to the fact that both organic pollutants and heavy metals are not removed from wastewater to MPC values by traditional water treatment methods, at the final stage of the water treatment process, as a rule, an adsorption post-treatment stage is introduced. The adsorption method can remove pollution of various nature to the minimum residual concentration in the absence of secondary pollution. In recent years, for these purposes, natural mineral sorbents - silicates, which usually include materials with a regular
January, 2023
186
structure (diatomite, flask, vermiculite, hydromica, and others) are increasingly used. Natural silicates are activated chemically or thermally to increase and regulate their pore structure, changing the nature of the surface.
LITERATURE ANALYSIS AND METHODOLOGY
Hence, a promising and very relevant trend is the development of new forms natural modified sorbents intended for local post-treatment of water. Modification of layered silicates with mineral acids leads to an increase in their sorption capacity [1]. The most complete study of the surface modification of layered silicates is presented in the monograph by Yu.I. Tarasevich and F.D. Ovcharenko [2].
It is known [3] that a natural polysaccharide (chitin, chitosan) is used as a surface modifier of natural silicates. The use of polysaccharides for the modification of vermiculites makes it possible to obtain new sorbents with a higher adsorption capacity [4, 5].
Vermiculite was modified as follows: 100 g of vermiculite heated to constant weight at a temperature of 120-150°C with a grain size of 0.10-0.05 mm was stirred in 200 ml of 7 (12, 20, 36.5)% hydrochloric acid solution for two days. Then the suspension was filtered and washed with distilled water until neutral. The resulting vermiculite was dried to constant weight. The main elements were analyzed and its important physico-chemical properties were determined.
DISCUSSION
It is important to conduct fundamental research based on the study of the sorption properties of chitosan. Chitosan and its derivatives are used in a number of industries of interest. The sorbents obtained during the study were stored at a temperature of 20-25°C for 1-7 days. After separating the solid phase, it was washed with distilled water, and the washed water was checked for the presence of Cl- ions. The dried samples were then stored in a desiccator. The study of the adsorption of benzene vapors on the samples was carried out on Mac Ben device and on the basis of the desiccator method. To determine the adsorption activity in solutions, spectral analyzes were performed in the presence of dye solutions (methylene blue (MB), indigo and congo red (CR)). The concentration of dye solutions varied from 0.1 to 1 mmol/l.
RESULTS
We used vermiculite-modified chitosan obtained according to the procedure [6-7]. The adsorption isotherm was determined by the volumetric method. The convenience of this method lies in
January, 2023
187
the fact that it allows one to further expand the theoretical knowledge of adsorption based on thermodynamic laws. This organ-vermiculite based on chitosan from benzene and water vapor molecules is characterized by interaction with physicochemical forces (Fig. 1, Table 1).
As shown in fig. 1, the duration of the heat of adsorption is determined by the interaction of benzene and water vapors with the amino and hydroxide groups of chitosan due to van der Waals forces. The heat of adsorption is continuous, since the processes proceed with the same bond. Since the molecules of benzene and water vapor are initially sorbed on the surface of the organo-vermiculite membrane, the sorption is very strong. During the last adsorption of benzene and water vapor molecules, the heat of adsorption equalizes on the line of thermal condensation of benzene and water vapor at a temperature of 293-298 K.
a mol/kgVC+XZ in benzene vapor
3,5
3 2,5 2 1,5 1
0,5 0
2 ,392
1 ,773
1 1,12 0,929 0,647 ,35 6 1
r\
3,18
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 l#Pc ß)
A)
£ mol/kg
1,4 1,2 1 0,8 0,6 0,4 0,2 0
VC in water vapor
1,3
0,9
0,65
C ,5
5 0, 31
0 1,12 0,2
6,2
4,412
3 ,332 3,872
2, 2,251 791
f 1 ,351 1,891 L
0
,213
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 P/P;
C)
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 P,/Ps
D)
Figure 1. Sorption isotherms of benzene and water vapor by vermiculite (A,C) and modified
vermiculite (B,D)
Table 1 shows the results of benzene and water vapor sorption isotherm of organvermiculite and the values of
January, 2023
188
monolayer capacity, specific surface area, saturation volume, mesopore and pore radii were calculated. Compared
Table 1
Benzene and water vapor sorption isotherm of organvermiculite
№ am(single floor capacity) mol/kg S (comparative o surface) m /g Wo Micropore Vs Saturation volume W me, mesoporous Pore radius Â, (nm)
In benzene vapor
VC 0,146 35,14 0,0207402 0.0198545 0.00 11,3
VC+XZ 0,786 188,26 0,1865572 0,2818636 0,10 29,9
In water vapor
VC 0,148 9,62 0,0744513 0,02448 -0.05 50,9
VC+XZ 1,383 89,84 0,0705948 0,111834 0,04 24,9
with vermiculite, chitosan-modified organvermiculite has higher single-layer capacity and specific surface area. This serves to further increase the adsorption properties of sorbents.
The main method for determining the crystal structure of organosorbents is X-ray diffraction analysis. X-ray diffraction lines for the original XZ, VK and synthesized XZ-VK show that the interplanar distance d0.01 of vermiculite layers is 9.8 in Chitosan, respectively; 19.6; 22.5; 24.5 Â in the mineral vermiculite, at 15.8; 18.2; 21; 24; at 30 Â and 9.6 in chitosan-modified vermiculite; 26.2; 31; increased to 34.9 Â (Fig. 2,3-4) [10-12].
Figure 2. Results of X-ray diffraction analysis of chitosan.
January, 2023
189
Figure 3. Results of X-ray diffraction analysis of vermiculite
Figure 4. Results of X-Ray Diffraction Analysis of Chitosan + Vermiculite
CONCLUSION
According to the results of our research, the specific surface capacity, micro-and mesoporosity of the sorbent obtained by modifying vermiculite on the basis of chitosan was studied using modern physico-chemical methods using the Mc-Ben device, and the degree of crystallinity using the X-ray diffraction analysis method. Our studied sorbent allows us to use it as an import substitute sorbent for industrial wastewater treatment.
REFERENCES
1. Haroon, H., Waseem, A., & Q. Mahmood, (2013). "Treatment and
January, 2023
190
ISSN: 2181-1385
Cite-Factor: 0,89 | SIS: 1,12 | ASI-Factor: 1,3 | SJIF: 5,7 | UIF: 6,1
reuse of wastewater from beverage industry," Journal of Chemical Society of Pakistan, V. 35, pp. 5-11.
2. S. Y. Lee and S. J. Kim, (2002). "Expansion of smectite by hexadecyltrimethyl ammonium," Clays and Clay Minerals, V. 50, no. 4, pp. 435-445.
3. Bonczek, J., Harris, W. & P. Nkedi-Kizza, (2002). "Monolayer to bilayer transitional arrangements of hexadecyltrimethylammonium cations on Na-montmorillonite," Clays and Clay Minerals, V. 50, no.1, pp. 11-17.
4. Shapkin, N., Khal'chenko, I., and other. (2017). // Inorganic materials. V.53. №10. P.1091.
5. Ихтиярова, Г., Умаров, Б., Исомитдинова, Д., & Туробджанов, С., (2021). Очистка сточных вод текстильного предприятия композиций на основе вермикулита и модифицированного хитозана. // Журнал композиционные материалы. -№4., С.116-118.
6. Khalchenko, I., Shapkin, N., & Shkuratov, A. (2017). // Water practice and technology. V. 12. № 1. P. 117.
7. Хальченко, И., и др. (2015). Химическая модификация вермикулита и исследование его физико-химических свойств. http://butlerov.com/ Butlerov Communications. Vol.41. No.1. P.74-82.
8. Ikhtiyarova, G., and other. (2021). Очистка текстильных сточных вод вермикулитом модифицированного с хитозаном.// International Journal of innovative research.-V.9. Issue 9., рр.9780-9786.
9. Ikhtiyarova, G., and other. (2020). Extraction of chitosan from died honey bee Apis Mellifera // Chemical technology, control and management. International scientific and technical journal. Vol. Iss.2, Article 3. -P. 15-20.
10. Ikhtiyarova, G., and other. (2012). "Characterization of natural- and organo-bentonite by XRD, SEM, FT-IR and thermal analysis techniques and its adsorption behaviour in aqueous solutions," Clay Minerals, V. 47, pp. 31-44.
11. Egamberdiev, E., Rakhmanberdiev, A., & Mardonov, A. (2018). Study of the sorption rate of composition paper samples obtained on the bases of cellulose-bearing plants cellulose and basalt fiber // Austrian journal of Technical and Natural Sciences. №1-2, p.56-62.
12. Egamberdiev, E., Shoabdullaev, Sh., & Saidov, D. 2020. Paper production based on secondary row materials // XVI XVI International Scientific and Practical Conference «Effective tools of modern science» Prague, p. 21-24.
January, 2023
